Endless Band Hose Clamp with Buckle - 5 mm wide.
Again one of those items that allows you to put the finishing touches on a restoration!
This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.
Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.
Over the years, these clamps have become harder and harder to find but we managed to find a source!
We are selling these in sets.
Such a set consist of the following:
- Approximately 100 cm Zinc-plated band, 5 millimeters wide
- 3 buckles
This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.
Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.
Please note that this style of clamping is NOT suitable for steel-braided lines.
Should you require extra buckles, then you can order them HERE.
This is Our Article Number: norm5mm