(18) Pump Diaphragm for Zenith 40 TIN Carburetor CCR2339

Zenith
CCR2339
9502777331628
    Delivery time: In stock and ready to ship
Add to cart
  • Description
  • More

CCR2339
Pump Diaphragm for a Zenith 40 TIN Carburetor.

CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor

This is a newly produced replacement pump diaphragm.

This product is priced and sold as a single unit.
Required quantity per carburetor: 3

This is Number 18 in the drawing of the Zenith 40 TIN carburetor.

CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor

This is Our Article Number: CCR2339

* Made in Italy *

Operating principles of the acceleration pump and the role of the diaphragm in this:

This diaphragm is activated by a lever that is connected to the throttle lever(s).

When releasing the throttle, a spring returns the diaphragm to its initial position and by doing so, it sucks-in fuel from the float chamber.
A one-way valve prevents this fuel from leaking back into the valve chamber.

When you then activate throttle, that same lever pushes the diaphragm inwards and the pressure that is thus created makes the fuel being squirted downstream with the main airflow through the pump jet.

This extra flow of fuel will prevent "fuel starvation" from occurring when the throttle is suddenly opened which allows large quantities of air being sucked into the engine.

When you then release the throttle again, the diaphragm is again pushed back by the spring, thus priming the pump chamber with a fresh supply of fuel and making it ready to repeat the procedure.

This is an excellent system that has been employed for decades by various makes of carburetors and applied to all kinds of applications.
So, not only Zenith but also Solex, Pierburg, Weber and Mikuni used this system with more or less identical operating principles.

However, to ascertain a flawless operation of this system, the diaphragm need to be in excellent condition.

The original diaphragms are now coming of age and are suffering from the ravages of aggressive modern fuels which causes the "rubberized textile" material to harden or even crack, causing erratic running of the engine and fuel leaks.

Replacing the diaphragm is then the only sensible option which is a rather simple operation.

CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor


CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor

CCR2339
Pump Diaphragm for a Zenith 40 TIN Carburetor.

This is a newly produced replacement pump diaphragm.

This product is priced and sold as a single unit.
Required quantity per carburetor: 3

This is Number 18 in the drawing of the Zenith 40 TIN carburetor.

This is Our Article Number: CCR2339

* Made in Italy *

CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor

CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor

CCR2339 Pump Diaphragm for Zenith 40 TIN Carburetor

!