Dellorto SS1 and SS2 Carburetor Parts
Dellorto SS1 and SS2 Carburetor Parts

Dellorto SS1 and SS2 Parts

Dellorto SS1 and SS2 Carburetor Parts.

On this page you will find parts for the Dellorto SS1 and Dellorto SS2 range carburetors.

Click HERE for an exploded view drawing of the SS1 / SS2.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

We are still very much expanding our parts offerings for these carburetors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto SS1 and SS2 Carburetor Parts

!
1494
(7) Fuel Union Nut for Dellorto SS1 and SS2 carburetors

(7) Fuel Union Nut for Dellorto SS1 and SS2 carburetors

New-Old-Stock Fuel Union Nut for the Dellorto SS1 and SS2 series carburetors.

Please note that as this is an original old stock item, the surface finish might be less-than-perfect.

Required quantity per carburettor: 1

This is item number 7 in the drawing.

 

 

(7) Fuel Union Nut for Dellorto SS1 and SS2 carburetors

1416
(8) Fuel Banjo Fiber Ring for Dellorto SS1 and SS2 carburetors

(8) Fuel Banjo Fiber Ring for Dellorto SS1 and SS2 carburetors

Fiber ring to seal the fuel banjo on the Dellorto SS1 and SS2 series carburetors.

This ring has an internal diameter of 13.75 mm.

Required quantity per carburettor: 2

This is item number 8 in the drawing.

 

 

(8) Fuel Banjo Fiber Ring for Dellorto SS1 and SS2 carburetors

1419
(10) Fuel banjo filter for Dellorto SS1 and SS2 carburetors

(10) Fuel banjo filter for Dellorto SS1 and SS2 carburetors

Fuel banjo filter for Dellorto SS1 and SS2 series carburettors.

Required quantity per carburettor: 1

This is item number 10 in the drawing.

 

 

 

(10) Fuel banjo filter for Dellorto SS1 and SS2 carburetors

1104
(12) Cable Adjuster for Dellorto SS1 and SS2 carburetors

(12) Cable Adjuster for Dellorto SS1 and SS2 carburetors

Cable Adjuster for Dellorto SS1 and SS2 carburetors.

This cable adjuster uses Lock Nut 1691 to secure its setting.
For your convenience, you can order this lock nut right along with this adjuster by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 12 in the drawing.

(12) Cable Adjuster for Dellorto SS1 and SS2 carburetors

1691
(13) Lock Nut for Choke Cable Adjuster on Dellorto SS1 and SS2 carburetors

(13) Lock Nut for Choke Cable Adjuster on Dellorto SS1 and SS2 carburetors

Locknut that secures the setting on the choke cable adjuster of the Dellorto SS1 and SS2 series carburetors.

Required quantity per carburettor: 1

This is item number 13 in the drawing.

 

 

 

(13) Lock Nut for Choke Cable Adjuster on Dellorto SS1 and SS2 carburetors

1740
(20) Top Ring Clip for Dellorto SS1 25 and 30 carburetors

(20) Top Ring Clip for Dellorto SS1 25 and 30 carburetors

Special style clip to secure the setting of the top ring on the 25 mm and 30 mm versions of the Dellorto SS1 carburetors.

Required quantity per carburettor: 1

This is item number 20 in the drawing.

 

 

 

(20) Top Ring Clip for Dellorto SS1 25 and 30 carburetors

1407
(28) Needle Clip for Dellorto SS1 and SS2 carburetors

(28) Needle Clip for Dellorto SS1 and SS2 carburetors

Clip to secure the needle on the Dellorto SS1 and SS2 series carburetors.

Required quantity per carburettor: 1

This is item number 28 in the drawing.

 

 

 

 

(28) Needle Clip for Dellorto SS1 and SS2 carburetors

1161
(50) Fiber Ring for Dellorto SS1 and SS2 carburetors

(50) Fiber Ring for Dellorto SS1 and SS2 carburetors

Fiber ring to seal the main jet holder and Flot Bowl Nut on the Dellorto SS1 and SS2 series carburetors.

This ring has an internal diameter of 25 mm and an external diameter of 30 mm. The thickness is 1 mm.

Please compare this ring carefully with what you need for your carb as there were a number of different rings used throughout the years.

Required quantity per carburettor: 2

This is item number 50 in the drawing.

(50) Fiber Ring for Dellorto SS1 and SS2 carburetors

2294
(50) Fiber Ring for Dellorto SS1 and SS2 carburetors

(50) Fiber Ring for Dellorto SS1 and SS2 carburetors

Fiber ring to seal the main jet holder and Float Bowl Nut on the Dellorto SS1 and SS2 series carburetors.

This ring has an internal diameter of 21.9 mm and an external diameter of 26.8 mm. The thickness is 0.95 mm.

Please compare this ring carefully with what you need for your carb as there were a number of different rings used throughout the years.

Required quantity per carburettor: 2

This is item number 50 in the drawing.

(50) Fiber Ring for Dellorto SS1 and SS2 carburetors

2453
Aluminum Trumpet for Dellorto SS1 25 - 30 carburetors

Aluminum Trumpet for Dellorto SS1 25 - 30 carburetors

Screw-on aluminum trumpet for the Dellorto SS1 25 - 30 series carburetors with an internal thread size of M34 x 1.25mm.

Dimensions:

  • Overall length: 55 mm
  • Width: 48 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium.

Aluminum Trumpet for Dellorto SS1 25 - 30 carburetors

C1050
C1050 Pipercross Universal Airfilter Socks for Ram Pipes

C1050 Pipercross Universal Airfilter Socks for Ram Pipes

Newly arrived C1050 Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

These socks are easily tailored to size by shortening them with a pair of scissors.

The generous inner diameter makes them suitable for virtually all rampipes.

Created out of the famous Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

This is the "normal" version, very well suited for street and track use. Should you be using your vehicle in extremely dusty circumstances, like auto- and motocross, we recommend the Heavy Duty version, C1050MX.

Dimensions:

  • Internal diameter: 70 mm
  • External diameter: 95 mm
  • Internal height: 100 mm
  • External height: 115 mm

Before putting the socks in place, you cut them to size. Then slide them onto the ram pipes and, when desired, you can secure them in place with a simple plastic tie-strap.

Although Pipercross supplies these only in pairs, we understand the need in the market for "singles" and consequently we sell these individually.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1050 Pipercross Universal Airfilter Socks for Ram Pipes

C1050MX
C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

Newly arrived C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous Heavy Duty Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

These socks are easily tailored to size by shortening them with a pair of scissors.

The generous inner diameter makes them suitable for virtually all rampipes.

Created out of not less than 3 layers of the famous, green, Heavy Duty Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

Being the heavy duty version, these socks are very well suited for use in extremely dusty circumstances like auto- and motocross.

For street and track use, the better option is to pick the normal version, C1050.

Dimensions:

  • Internal diameter: 55 mm
  • External diameter: 95 mm
  • Internal height: 95 mm
  • External height: 120 mm

Before putting the socks in place, you cut them to size. Then slide them onto the ram pipes and, when desired, you can secure them in place with a simple plastic tie-strap.

Although Pipercross supplies these only in pairs, we understand the need in the market for "singles" and consequently we sell these individually.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

C1052
C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

Newly arrived C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous "enclosed" Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

Contrary to the C1050 "open" socks, this version has a rear panel with opening so that it "hugs" the ram pipe.

The generous inner diameter makes them suitable for virtually all rampipes.

The opening in the rear panel measures some 55 mm in diameter but can of course be stretched significantly thanks to the nature of the foam.

Created out of 3 layers of the the famous Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

Dimensions:

  • Internal diameter: 80 mm
  • External diameter: 110 mm
  • Internal height: 42.5 mm
  • External height: 70 mm

Simply slide the sock onto the ram pipes and, when desired, you can secure them in place with a plastic tie-strap.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch