Pierburg Carburetor Service Kits
Pierburg Carburetor Service Kits

Pierburg Carburetor Service Kits

Pierburg Carburetor Service Kits.

On this page you will find our service kits for Pierburg carburettors.

Please note that Pierburg carburetors were also sold under the Solex brand but that small differences between the two do exist.

Our Solex range of service kits can be found HERE.

Pierburg Carburetor Service Kits

!
PMS170
Service Kit for Pierburg 36 1B carburetors

Service Kit for Pierburg 36 1B carburetors

Service kit for the Pierburg 36 1B carburetors.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B carburetors

PMS170
Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

Service kit for the Pierburg 36 1B1 and 1B3 carburetor as used on:

  • 1979 - 1983 Audi 80 GL, S & L 1300 - 1272 cc
  • 1979 - 1983 Audi 80 GL, S & L 1500 - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

Service kit for the Pierburg 36 1B1 carburetor as used on the Bedford Astra Van 4WD - 1297 cc.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

Service kit for the Pierburg 36 1B3 carburetor as used on the 2307 cc Mercedes-Benz L410 - L601 - L602 - L611.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1584 cc Opel Ascona 1600 N & S, C-generation.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

Service kit for the Pierburg 36 1B1 carburetor as used on, amongst others, the:

  • 1196 cc Opel Corsa 1200
  • 1297 cc Opel Corsa 1300 SR

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett D 1200 SR

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett D 1200 SR

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1982 - 1984 1196 cc Opel Kadett D 1200 SR

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett D 1200 SR

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1297 cc Opel Kadett E 1300 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1584 cc Opel Manta 1600 N & S, B-generation.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1796 cc Opel Rekord E 1800 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1297 cc Vauxhall Nova 1300 L

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • Volkswagen Golf 1500 S, LS and GLS - 1457 cc.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • 1978 - 1983 Volkswagen Iltis 4x4 - 1700 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Jetta 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Jetta 1500

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • Volkswagen Jetta 1500 S, LS and GLS - 1457 cc
  • Volkswagen Jetta C, CL and GL - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Jetta 1500

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1982 Volkswagen LT Van - 1984 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • Volkswagen Passat 1300 (A Motor) - 1272 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1983 Volkswagen Passat 1600 - 1588 cc
  • 1979 - 1983 Volkswagen Passat 1600 Automatic - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • Volkswagen Polo 1050 - 1043 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1984 Volkswagen Scirocco 1500 S - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Golf 1600 GLS - LS - S

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Golf 1600 GLS - LS - S

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Golf 1600 GLS - 1595 cc
  • Volkswagen VW Golf 1600 LS - 1595 cc
  • Volkswagen VW Golf 1600 S - 1595 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Golf 1600 GLS - LS - S

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Golf 1800

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Golf 1800

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Golf 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Golf 1800

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Jetta 1800

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Jetta 1800

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Jetta 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Jetta 1800

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Santana 1600

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Santana 1600

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Santana 1600 - 55 PS - 1588 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Santana 1600

PMS216
Service Kit for Pierburg 24-28 2E 2 carburetors for Volkswagen Santana 1800

Service Kit for Pierburg 24-28 2E 2 carburetors for Volkswagen Santana 1800

Service kit for the Pierburg 24-28 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Santana 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 2 carburetors for Volkswagen Santana 1800

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Santana 1800

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Santana 1800

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Santana 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Santana 1800

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Scirocco 1600

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Scirocco 1600

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Scirocco 1600 - 1595 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Scirocco 1600

PMS216
Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Scirocco 1800

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Scirocco 1800

Service kit for the Pierburg 28-30 2E2 carburetors as used on, amongst others, the:

  • Volkswagen VW Scirocco 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 2 carburetors for Volkswagen Scirocco 1800

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Ascona 1300

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Ascona 1300

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Ascona 1300 - 1297 cc
  • Opel Ascona 1.3 N - 1297 cc
  • Opel Ascona 1.3 S - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Ascona 1300

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Corsa 1300 SR

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Corsa 1300 SR

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Corsa 1300 SR - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Corsa 1300 SR

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Kadett 1300 S

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Kadett 1300 S

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Kadett 1300 S - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Kadett 1300 S

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Kadett 1600 S

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Kadett 1600 S

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Kadett 1600 S - 1598 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Kadett 1600 S

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Manta 1300

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Manta 1300

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Manta 1300 - 1297 cc
  • Opel Manta 1.3 N - 1297 cc
  • Opel Manta 1.3 S - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Manta 1300

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Omega 1800

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Omega 1800

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Omega 1800 - 1796 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Omega 1800

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Vectra 1400

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Vectra 1400

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Vectra 1400

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Vectra 1400

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Vectra 1600

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Vectra 1600

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Opel Vectra 1600

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Opel Vectra 1600

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Astra 1300

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Astra 1300

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Vauxhall Astra 1300 - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Astra 1300

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Astra 1600

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Astra 1600

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Vauxhall Astra 1600 - 1598 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Astra 1600

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Carlton 1800

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Carlton 1800

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Vauxhall Carlton 1800 - 1796 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Carlton 1800

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Cavalier 1300 FWD

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Cavalier 1300 FWD

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Vauxhall Cavalier 1300 FWD - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Cavalier 1300 FWD

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Nova 1300 L

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Nova 1300 L

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Vauxhall Nova 1300 L - 1297 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Vauxhall Nova 1300 L

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Golf 1300 LS - GL

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Golf 1300 LS - GL

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Golf 1300 LS - 1272 cc
  • Volkswagen VW Golf 1300 GL - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Golf 1300 LS - GL

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1300 LS - GL

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1300 LS - GL

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Golf 1300 LS - 1272 cc
  • Volkswagen VW Golf 1300 GL - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1300 LS - GL

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1600 GLS - LS - S

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1600 GLS - LS - S

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Golf 1600 GLS - 1595 cc
  • Volkswagen VW Golf 1600 LS - 1595 cc
  • Volkswagen VW Golf 1600 S - 1595 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1600 GLS - LS - S

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1800

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1800

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Golf 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Golf 1800

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Jetta 1300 C - CL - GL - LX

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Jetta 1300 C - CL - GL - LX

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Jetta 1300 C - 1272 cc
  • Volkswagen VW Jetta 1300 CL - 1272 cc
  • Volkswagen VW Jetta 1300 GL - 1272 cc
  • Volkswagen VW Jetta 1300 LX - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Jetta 1300 C - CL - GL - LX

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Jetta 1300 C - CL - GL - LX

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Jetta 1300 C - CL - GL - LX

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Jetta 1300 C - 1272 cc
  • Volkswagen VW Jetta 1300 CL - 1272 cc
  • Volkswagen VW Jetta 1300 GL - 1272 cc
  • Volkswagen VW Jetta 1300 LX - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Jetta 1300 C - CL - GL - LX

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Jetta 1800

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Jetta 1800

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Jetta 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Jetta 1800

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen LT 2000

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen LT 2000

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW LT 2000 - 1984 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen LT 2000

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen LT 2000

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen LT 2000

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW LT 2000 - 1984 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen LT 2000

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Polo 1300 GLS

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Polo 1300 GLS

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Polo 1300 GLS - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Polo 1300 GLS

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Santana 1600

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Santana 1600

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Santana 1600 - 55 PS - 1588 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Santana 1600

PMS216
Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Scirocco 1300

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Scirocco 1300

Service kit for the Pierburg 24-28 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Scirocco 1300 - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 24-28 2E 3 carburetors for Volkswagen Scirocco 1300

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1300

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1300

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Scirocco 1300 - 1272 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1300

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1600

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1600

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Scirocco 1600 - 1595 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1600

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1800

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1800

Service kit for the Pierburg 28-30 2E3 carburetors as used on, amongst others, the:

  • Volkswagen VW Scirocco 1800 - 1781 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Scirocco 1800

PMS216
Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Transporter 1900

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Transporter 1900

Service kit for the Pierburg 28-30 2E 3 carburetors as used on, amongst others, the:

  • Volkswagen VW Transporter 1900 - 1913 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 3 carburetors for Volkswagen Transporter 1900

PMS216
Service Kit for Pierburg 28-30 2E 4 carburetors for Volkswagen Transporter 1900

Service Kit for Pierburg 28-30 2E 4 carburetors for Volkswagen Transporter 1900

Service kit for the Pierburg 28-30 2E 4 carburetors as used on, amongst others, the:

  • Volkswagen VW Transporter 1900 - 1913 cc

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various rubber (Viton) o-rings
  • Pump diaphragm
  • Part-throttle enrichment diaphragm
  • Needle valve

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 28-30 2E 4 carburetors for Volkswagen Transporter 1900

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1970 - 1975 Opel Ascona A 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Ascona 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Ascona 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1975 - 1981 Opel Ascona B 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Ascona 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel GT 1900

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel GT 1900

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel GT 1900 - 1897 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel GT 1900

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Manta 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Manta 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1970 - 1975 Opel Manta A 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Manta 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Manta 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Manta 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1975 - 1981 Opel Manta B 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Manta 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Rekord 1900 L & S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Rekord 1900 L & S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord B 1900 S - 1897 cc
  • Opel Rekord B 1900 L - 1897 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Rekord 1900 L & S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 1900 L & S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 1900 L & S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord C 1900 S - 1897 cc
  • Opel Rekord C 1900 L - 1897 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 1900 L & S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 2200

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 2200

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord C 2200 - 2239 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 2200

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel D Rekord 1700 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel D Rekord 1700 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord D 1700 S - 1698 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel D Rekord 1700 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Vauxhall Cavalier 1600

Service Kit for Solex Pierburg 32 DIDTA carburetors for Vauxhall Cavalier 1600

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1975 - 1981 Vauxhall Cavalier 1600 - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Vauxhall Cavalier 1600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors

Service Kit for Solex Pierburg 35 EEIT carburetors

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • Ford Capri MKII 2300
  • Ford Capri MKII 2500

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1977 - 1982 Ford Consul 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1977 - 1982 MKV Ford Cortina 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1975 - 1981 Ford Granada 2000 V6 - 1998 cc
  • 1975 - 1985 Ford Granada 2300 - 2293 cc
  • 1975 - 1977 Ford Granada 2600 - 2550 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1982 - 1985 Ford Sierra 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2300 L - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as, amongst others, some Hanomag models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, some Mercedes Benz models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

FR4201
Service Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

Service Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, the:

  • 1974 - 1979 Opel Kadett C 1.0 N
  • 1974 - 1979 Opel Kadett C 1.0 S (Export)
  • 1973 - 1979 Opel Kadett C 1.2 N (52 PS)

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, on the following cars:

  • 1974 - 1979 Opel Olympia C 1.0 N
  • 1973 - 1979 Opel Olympia C 1.0 S (Export)
  • 1973 - 1979 Opel Olympia C 1.2 N (52 PS)
  • 1976 - 1979 Opel Olympia C 1.2 N (55 PS)

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

PMS246
Service Kit for Pierburg 30 PDSI and 28 PDSIT carburetors for Ford Taunus 12M P4

Service Kit for Pierburg 30 PDSI and 28 PDSIT carburetors for Ford Taunus 12M P4

Service Kit for the Pierburg 30 PDSI and 28 PDSIT 4 carburetors as fitted on, amongst others, the:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete Needle Valve Size 150
  • Float Chamber Gasket
  • Base Gasket
  • Choke Housing O-Ring
  • Choke Housing Gasket
  • All Required Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of excellent Italian manufacture.

Service Kit for Pierburg 30 PDSI and 28 PDSIT carburetors for Ford Taunus 12M P4

FR3622
Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

Service kit for the Solex and Pierburg PDSI 32 series carburetors as, amongst others, used on the following cars:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500
  • 1968 - 1971 Ford Taunus 12M TS P4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gaskets
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

FR9545
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Ascona A 1200
  • 1970 - 1975 Opel Ascona A 1600 N
  • 1975 - 1981 Opel Ascona B 1200
  • 1979 - 1981 Opel Ascona B 1300 N
  • 1975 - 1978 Opel Ascona B 1600
  • 1976 - 1981 Opel Ascona B 1900 N
  • 1981 Opel Ascona C 1300 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

FR9545
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1970 - 1973 Opel Kadett B 1100 N & S
  • 1971 - 1973 Opel Kadett B 1200 S
  • 1973 - 1979 Opel Kadett C 1200 N & S
  • 1979 - 1984 Opel Kadett D 1000
  • 1979 - 1984 Opel Kadett D 1200 N & S
  • 1979 - 1984 Opel Kadett D 1300 N
  • 1984 - 1986 Opel Kadett E 1300 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

FR9545
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Manta A 1200
  • 1970 - 1975 Opel Manta A 1600 N
  • 1975 - 1981 Opel Manta B 1200
  • 1979 - 1981 Opel Manta B 1300 N
  • 1975 - 1978 Opel Manta B 1600
  • 1976 - 1981 Opel Manta B 1900 N
  • 1981 Opel Manta 1300 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

FR9545
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1977 Opel Rekord D 1700 N & L
  • 1975 - 1977 Opel Rekord D 1900 N
  • 1977 - 1982 Opel Rekord E 1700 N & 1900 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

FR9545
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1980 - 1984 Vauxhall Astra 1200

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

FR6922
Service Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Service Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Service Kit for Solex Pierburg 36/40 en 38 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 36/40 and 38 series carburetors as, amongst others, used on the following cars:

  • BMW 1502
  • BMW 1602
  • BMW 1800
  • BMW 1802
  • BMW 2000
  • BMW 2002
  • BMW 518
  • Mercedes Benz 200
  • Mercedes Benz 230 (W110)
  • Mercedes Benz L 601 (208)
  • Mercedes Benz L 208
  • Mercedes Benz L 308
  • Mercedes Benz L 409

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • 3 Pump Diaphragms
  • Complete needle valve
  • 3 Float chamber gaskets
  • 2 Base gaskets
  • Various copper washers
  • Various aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors

PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for BMW 02-series

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for BMW 02-series

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors as used on, amongst others, the following BMW 02-series models (and equivalents in the Neue Klasse):

  • BMW 1502
  • BMW 1602
  • BMW 1802
  • BMW 2002

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for BMW 02-series

PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for BMW Neue Klasse

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for BMW Neue Klasse

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors as used on, amongst others, the following BMW Neue Klasse-series models (and equivalents in the BMW 02-series):

  • BMW 1600
  • BMW 1800
  • BMW 2000

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for BMW Neue Klasse

PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors as used on, amongst others, the following Mercedes W110 models:

  • Mercedes Benz 200 W110 - 1998 cc - 1965 - 1968
  • Mercedes Benz 230 W110 - 6 cylinder - 2303 cc - 1965 - 1967

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

Service Set for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors as used on, amongst others, the following Mercedes-Benz TN1 Transporters:

  • Mercedes Benz L 601 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 208 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 308 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 409 - 2307 cc - 1972 - 1982

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

PMS223
Service Kit for Pierburg 32 PDSIT carburetors for Volkswagen 1500 + 1600 + Variant + Karmann Ghia

Service Kit for Pierburg 32 PDSIT carburetors for Volkswagen 1500 + 1600 + Variant + Karmann Ghia

Service Kit for Pierburg 32 PDSIT carburetors as used on, amongst others, the:

  • 1963 - 1964 Volkswagen 1500 S and Variant - 6 Volt - 40KW - 1493 cc
  • 1965 - 1969 Volkswagen 1600 and Variant - 6 Volt - 40KW
  • 1965 - 1979 Volkswagen 1600, Variant and Karmann Ghia - 12 Volt - 33KW

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float chamber gasket
  • Complete needle valve assembly, size 120
  • Pump Diaphragm
  • Choke Diaphragm
  • Base gaskets
  • All other required gaskets
  • All required copper washers
  • Vito O-Ring

This is a Carburetor City rebuild kit of outstanding Italian manufacture.

Service Kit for Pierburg 32 PDSIT carburetors for Volkswagen 1500 + 1600 + Variant + Karmann Ghia

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1968, 1969, 1970, 1971, 1972, 1973 and 1975 Audi 60 1500 & 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • Audi 80 S & LS 1500
  • 1974-series Audi 80 1300 & 1600
  • 1980-series Audi 80 L, S & LS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1968-series Opel Kadett B 1700 and Opel Kadett C 1700.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1968-series Opel Rekord C

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen 1500 + 1600 + Variant

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen 1500 + 1600 + Variant

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1973-series Volkswagen 1500, 1600 and Variant

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen 1500 + 1600 + Variant

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1977-series Volkswagen Passat 1300
  • 1975-series Volkswagen Passat 1500
  • 1979-series Volkswagen Passat 1600

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1979-series Volkswagen Santana 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the Volkswagen LT28 and LT31.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

FR8241
Service Kit for Solex and Pierburg 28 PICT carburetors for Volkswagen Beetle 1200

Service Kit for Solex and Pierburg 28 PICT carburetors for Volkswagen Beetle 1200

Service kit for the Solex and Pierburg PICT 28 carburetors as used mainly on the Volkswagen Beetle 1200.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gaskets
  • Copper washer
  • Pump diaphragm
  • Needle valve - size 1.50

Please note that Solex PICT was also sold as Pierburg PICT and that both these carburettors use the same rebuild kit.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex and Pierburg 28 PICT carburetors for Volkswagen Beetle 1200

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Derby 900

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Derby 900

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • VW Volkswagen Derby 900

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Derby 900

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Derby 1000

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Derby 1000

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • VW Volkswagen Derby 1000

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Derby 1000

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Golf 1500 L-S-LS-GLS

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Golf 1500 L-S-LS-GLS

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • 1974 - 1975 VW Volkswagen Golf 1500 L - 1471 cc
  • 1974 - 1975 VW Volkswagen Golf 1500 LS - 1471 cc
  • 1974 - 1975 VW Volkswagen Golf 1500 GLS - 1471 cc
  • 1977 - 1979 VW Volkswagen Golf 1500 S - 1457 cc
  • 1977 - 1979 VW Volkswagen Golf 1500 LS - 1457 cc
  • 1977 - 1979 VW Volkswagen Golf 1500 GLS - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Golf 1500 L-S-LS-GLS

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Golf 1600 S-LS-GLS

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Golf 1600 S-LS-GLS

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • 1975 - 1977 VW Volkswagen Golf 1600 S - 1588 cc
  • 1975 - 1977 VW Volkswagen Golf 1600 LS - 1588 cc
  • 1975 - 1977 VW Volkswagen Golf 1600 GLS - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Golf 1600 S-LS-GLS

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Jetta 1500

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Jetta 1500

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • VW Volkswagen Jetta 1500

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Jetta 1500

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Jetta 1600

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Jetta 1600

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • VW Volkswagen Jetta 1600

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Jetta 1600

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1100

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1100

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • 1974 - 1975 VW Volkswagen Scirocco 1100 - 1093 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1100

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1500 S

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1500 S

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • 1974 - 1975 VW Volkswagen Scirocco 1500 S - 1471 cc
  • 1975 - 1979 VW Volkswagen Scirocco 1500 S - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1500 S

PMS134
Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1600 TS

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1600 TS

Service kit for the Pierburg 34 PICT 5 carburetors as used on, amongst others, the:

  • 1975 - 1977 VW Volkswagen Scirocco 1600 TS - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Base gasket
  • Float chamber gasket
  • Choke Element gasket
  • Copper washer
  • Aluminum washer
  • Pump diaphragm
  • Needle valve - size 1.50
  • Various rubber (Viton) O-Rings

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Pierburg 34 PICT 5 carburetors for Volkswagen Scirocco 1600 TS

FR1118
Service Kit for Solex and Pierburg PIC and PICT carburetors for Volkswagen

Service Kit for Solex and Pierburg PIC and PICT carburetors for Volkswagen

Service kit for the Solex and Pierburg PIC and PICT carburetors as used mainly on the following Volkswagen models:

  • Volkswagen VW 1303 cc
  • Volkswagen VW 1600 cc
  • Volkswagen VW Polo S 800 cc
  • Volkswagen VW Polo 900
  • Volkswagen VW Polo 900 Coupe 1050 cc
  • Volkswagen VW Polo S/SL 1100 cc
  • Volkswagen VW Derby L 900 cc en 1050 cc
  • Volkswagen VW Derby S/LS 1100 cc
  • Volkswagen VW Golf 1050 cc
  • Volkswagen VW Golf 1100 cc
  • Volkswagen VW Golf S/LS/GLS 1460 cc
  • Volkswagen VW 1600 cc
  • Volkswagen VW Golf S/AT 1500 cc
  • Volkswagen VW Jetta 1300 / 1500 / 1600
  • Volkswagen VW Scirocco - Rabbit 1460 cc
  • Volkswagen VW Scirocco S/AT
  • Volkswagen VW Scirocco 1500

It fits the following variations of the Pierburg and Solex PICT and PIC carburetors:

  • 34 PICT 3
  • 34 PICT 4
  • 34 PICT 5
  • 31 PIC 5
  • 31 PIC 6
  • 31 PIC 7

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This service kit contains, amongst others, the following parts to service 1 carburettor:

  • Various gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber (Viton) rings
  • Various diaphragms
  • Needle valve

Please note that both the Solex PIC and Solex PICT were also sold as Pierburg PIC and Pierburg PICT.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex and Pierburg PIC and PICT carburetors for Volkswagen

PMS166
Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

Service kit for the Solex 32-35 TDID carburetors as used on, amongst others, the Audi 80 GL 1500.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please verify that the parts in the picture will fit your carburetor as there were many varieties of this model which all differ in detail.
Please contact us in case of doubt.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Various carburetor-to-manifold gaskets
  • Various gaskets for the choke mechanism
  • Pump diaphragm
  • Needle Valve assembly; size 200
  • Various Aluminum Washers
  • Various Copper Washers
  • Various Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

PMS166
Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

Service kit for the Solex 32-35 TDID carburetors as used on, amongst others, the Audi 100 GL and GLS 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please verify that the parts in the picture will fit your carburetor as there were many varieties of this model which all differ in detail.
Please contact us in case of doubt.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Various carburetor-to-manifold gaskets
  • Various gaskets for the choke mechanism
  • Pump diaphragm
  • Needle Valve assembly; size 200
  • Various Aluminum Washers
  • Various Copper Washers
  • Various Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

PMS247
Service Kit for Pierburg 32 TDID carburetors

Service Kit for Pierburg 32 TDID carburetors

Service kit for the Pierburg 32 TDID carburetors.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 32 TDID carburetors

PMS247
Service Kit for Pierburg 32 TDID carburetors for Ford Capri 1700, 2000, 2300 & 2600

Service Kit for Pierburg 32 TDID carburetors for Ford Capri 1700, 2000, 2300 & 2600

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the:

  • 1968 - 1972 Ford Capri 1700, 2000, 2300 and 2600

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City service kit of excellent Italian manufacture.

Service Kit for Pierburg 32 TDID carburetors for Ford Capri 1700, 2000, 2300 & 2600

PMS247
Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the:

  • 1972 - 1975 Ford Taunus 1700 V4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City service kit of excellent Italian manufacture.

Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

PMS247
Service Kit for Pierburg 32 TDID carburetors for Renault 12

Service Kit for Pierburg 32 TDID carburetors for Renault 12

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the:

  • 1972 - 1980 Renault 12 R1170
  • 1972 - 1980 Renault 12 R1171
  • 1972 - 1980 Renault 12 R1130

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 32 TDID carburetors for Renault 12

PMS247
Service Kit for Pierburg 32 TDID carburetors for Renault 15

Service Kit for Pierburg 32 TDID carburetors for Renault 15

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the:

  • 1971 - 1980 Renault 15 R1130

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 32 TDID carburetors for Renault 15

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Italian style clear green fuel line hose with 8 mm inner diameter

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allow you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets of 3.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for stainless steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easy to read scale
  • Comes complete with 4 x 5 mm and 4 x 6 mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

9679
Brass vacuum take-off adapter for carburetors and manifolds

Brass vacuum take-off adapter for carburetors and manifolds

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Also fits the Weber DCOE series carburettors and Solex ADDHE.

 

Brass vacuum take-off adapter for carburetors and manifolds

SYNCHRONOMETER
Synchrometer airflow meter for carburetors