Malpassi Filter King Fuel Filters and Petrol King Fuel Pressure Regulators
Malpassi Filter King Fuel Filters and Petrol King Fuel Pressure Regulators

Malpassi Filter King - Petrol King

Malpassi Filter King Fuel Filters and Petrol King Fuel Pressure Regulators

Malpassi Filter King Fuel Filters and Petrol King Fuel Pressure Regulators

!
FPR014
Malpassi Fuel Pressure Regulator - Injection to Carburetors

Malpassi Fuel Pressure Regulator - Injection to Carburetors

Special Malpassi Fuel Pressure Regulator to convert an injection system to run on carburetors.

Normally, the fuel pressure delivered by the fuel pump on an injection system is way too high to be handled by a normal pressure regulator.

This regulator is especially equipped to handle those pressures and reduce them to a usable level for carbs thus eliminating the need for you to purchase a low-pressure fuel pump.

The regulator uses the exact same lines as your injection system, allowing you to easily revert back to your old set-up when needed.

It can regulate an astounding input pressure of 88 PSI (6 Bar) down to 2 PSI (0.14 Bar).

It comes equipped with a connection for a return line.

It is supplied with fuel line connectors for fuel line with an internal diameter of 8 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes complete with bracket and mounting materials.

Comes with connection schedule in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Fuel Pressure Regulator - Injection to Carburetors

PKA
Malpassi Petrol King Fuel Pressure Regulator

Malpassi Petrol King Fuel Pressure Regulator

Malpassi Petrol King Fuel Pressure Regulator.

Ideal when using an electric fuel pump to supply carburettors, eliminates the risk of flooding due to excess pressure.

The Petrol King Fuel Pressure regulator is suitable for most fuels except methanol.

Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).

Mounting bracket and bolts included.

The use of our Superior Quality PTFE tape on the unions is recommended.

It is supplied with fuel line connectors for fuel line with an internal diameter of 8 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes with instructions in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Petrol King Fuel Pressure Regulator

FUELLINEKIT6MM
Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

Special Offer -- FREE One-Way-Valve !

Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

Malpassi Petrol King Fuel Pressure Regulator - 6 mm set with FREE Sytec 6 mm One Way Valve valued at US$ 29.95!

Offer is good as long as the stock lasts!.

Ideal when using an electric fuel pump to supply carburettors, eliminates the risk of flooding due to excess pressure.

The Petrol King Fuel Pressure regulator is suitable for most fuels except methanol.

Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).

Mounting bracket and bolts included.

The use of our Superior Quality PTFE tape on the unions is recommended.

The pressure regulator is supplied with fuel line connectors for fuel line with an internal diameter of 6 mm but the standard thread of 1/8" tapered NPTF allows you to purchase connectors in all popular sizes.

Comes with instructions in English.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Malpassi Petrol King Fuel Pressure Regulator - 6 mm Set - Special offer

FK67
Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Maximum input pressure: 10 PSI (0.7 Bar)
  • Suitable for engines up to 150 BHP.
  • Clear glass bowl for easy inspection of the condition of the filter element
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 6 mm AND 8 mm fuel lines.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines both with and internal diameter of 6 mm as well as 8 mm internal diameter.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare Clear Glass Bowls are available HERE.
Alternatively, a cast metal bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 67mm with Glass Bowl

FK67E
Malpassi Filter King 67 MM Replacement Fuel Filter Element

Malpassi Filter King 67 mm Replacement Fuel Filter Element

Replacement element for the 67 millimeter Malpassi Filter King Fuel Filter and Pressure Regulator.

Replacement element only.

Unsure if this is the right size element for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct element for you.

If it measures 85 millimeter, you need THIS element instead.

Malpassi Filter King 67 MM Replacement Fuel Filter Element

30180_30176_67
Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

Newly arrived Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

Original Malpassi replacement seals for the Malpassi Filter King Fuel Filter and Pressure Regulator 67mm.

These original Malpassi seals replce both the bowl seal as well as the filter seal in the 67 mm versions of the Malpassi / Filter King fuel pressure regulators.

This is the version with four screws in the top cover.

The version with six screws is usually the 85 mm version.
Seals for the 85 mm version can be found HERE.

Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

30185MEMB067
Replacement Diaphragm for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

Replacement Diaphragm for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

Original Malpassi replacement diaphragm for the Malpassi Filter King Fuel Filter and Pressure Regulator 67mm.

This original Malpassi diaphragm replaces your worn-out diaphragm in the 67 mm versions of the Malpassi / Filter King fuel pressure regulators.

This is the version with four screw holes.

The version with six screw holes is usually the 85 mm version.
The diaphragm for that 85 mm version can be found HERE.

Replacement Diaphragm for Malpassi Filter King Fuel Filter and Pressure Regulator 67mm

RA005
Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

Replacement bowl for the 67 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Clear Glass.
Alternatively, a cast metal bowl is also available.

Measures 57.6 mm in diameter at the top.

Fits the 67 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct bowl for you.

If it measures 85 millimeter, you need THIS bowl instead.

 

 

Malpassi Spare Clear Glass Bowl for 67 mm Filter King Fuel Filter

RA007
Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

Replacement bowl for the 67 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Cast Metal. Excellently suited for competition use.
Alternatively, a clear glass bowl is also available.

Measures 57.6 mm in diameter at the top.

Fits the 67 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 67 millimeter, this is the correct bowl for you.

If it measures 85 millimeter, you need THIS bowl instead.

Malpassi Spare Cast Metal Bowl for 67 mm Filter King Fuel Filter

FK85
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with metal bowl to avoid the risk of breakage.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Cast Metal Bowls are available HERE.
Alternatively, a clear glass bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl

FK85/G
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with metal bowl to avoid the risk of breakage.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Includes a Sytec Pressure Gauge
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Cast Metal Bowls are available HERE.
Alternatively, a clear glass bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Metal Bowl and Pressure Gauge

FK85/T
Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl.

  • Fuel pressure can be regulated between 1.5 PSI and 5 PSI (0.1 - 0.35 Bar).
  • Regularly used in motorsport due to its ability to regulate and filter fuel without restriction.
  • Suitable for engines of over 150 BHP.
  • Competition model with a clear glass bowl that allows to quickly inspect the condition of the filter element.
  • Provision for the fitting of a pressure gauge; blanking plug supplied.
  • Replacement filters available HERE.
  • Brass in / out unions suitable for 5/16th - 8mm fuel pipe.
  • Instructions, mounting bracket and bolts included.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

The Fitting Kit is also available separately.

Spare, brass, blanking plugs can be found HERE.

Spare Clear Glass Bowls are available HERE.
Alternatively, a cast metal bowl is also available.

Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm with Clear Glass Bowl

FK85E
Malpassi Filter King 85 MM Replacement Fuel Filter Element

Malpassi Filter King 85 mm Replacement Fuel Filter Element

Replacement element for the 85 millimeter Malpassi Filter King Fuel Filter and Pressure Regulator.

Replacement element and new spring.

Unsure if this is the right size element for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct element for you.

If it measures 67 millimeter, you need THIS element instead.

Malpassi Filter King 85 MM Replacement Fuel Filter Element

30180_30178_85
Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 85mm

Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 85mm

Newly arrived Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 85mm

Original Malpassi replacement seals for the Malpassi Filter King Fuel Filter and Pressure Regulator 85mm.

These original Malpassi seals replce both the bowl seal as well as the filter seal in the 85 mm versions of the Malpassi / Filter King fuel pressure regulators.

This is the version with six screws in the top cover.

The version with four screws is usually the 67 mm version.
Seals for the 67 mm version can be found HERE.

Replacement Seals for Malpassi Filter King Fuel Filter and Pressure Regulator 85mm

30186MEMB085
Replacement Diaphragm for Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm

Replacement Diaphragm for Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm

Original Malpassi replacement diaphragm for the Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm.

This original Malpassi diaphragm replaces your worn-out diaphragm in the 85 mm versions of the Malpassi / Filter King fuel pressure regulators.

This is the version with six screw holes.

The version with four screw holes is usually the 67 mm version.
The diaphragm for that 67 mm version can be found HERE.

Replacement Diaphragm for Malpassi Filter King Fuel Filter and Pressure Regulator 85 mm

RA006
Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

Replacement bowl for the 85 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Clear Glass.
Alternatively, a virtually unbreakable cast metal bowl is also available.

Measures 61.5 mm in diameter at the top.

Fits the 85 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct bowl for you.

If it measures 67 millimeter, you need THIS bowl instead.

Malpassi Spare Clear Glass Bowl for 85 mm Filter King Fuel Filter

RA008
Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

Replacement bowl for the 85 mm Malpassi Filter King Fuel Filter and Pressure Regulator.

Virtually unbreakable cast metal version. Very well suited for competition use.
Alternatively, a clear glass bowl is also available

Measures 61.1 mm in diameter at the top.

Fits the 85 mm varieties ONLY.

Unsure if this is the right size bowl for your Fuel King filter?

Simply measure across the round(-ish) top of your filter assembly.

If it measures 85 millimeter, this is the correct bowl for you.

If it measures 67 millimeter, you need THIS bowl instead.

Malpassi Spare Cast Metal Bowl for 85 mm Filter King Fuel Filter

RA018
Malpassi Filter King Petrol King 1/8th NPTF Brass Blanking Plug

Malpassi Filter King Petrol King 1/8th NPTF Brass Blanking Plug

Spare, brass, blanking plug for the Malpassi Filter King and Petrol King fuel filters and fuel pressure regulators.

Also fits many other applications such as some manifolds etc with that same 1/8th NPTF tapered thread.

 

 

Malpassi Filter King Petrol King 1/8th NPTF Brass Blanking Plug

RA004
Malpassi Fuel Pressure Regulator Fitting Kit

Malpassi Fuel Pressure Regulator Fitting Kit

Fitting kit for the Malpassi Range of Filter King and Petrol King fuel pressure regulators and fuel filters.

 

 

 

 

 

Malpassi Fuel Pressure Regulator Fitting Kit

FPG001
Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar.

Low pressure fuel pressure gauge.

Ideal for setting the pressure on systems with carburettors.

Can be used with the 85mm Filter King filter and pressure regulator or our Fuel Pressure Gauge Adapter.

Range:

  • 0 - 15 PSI
  • 0 - 1 Bar

Thread: 1/8th" tapered NPTF.

Note:
This gauge should only be used for setting-up and then be removed for normal running.
NOT suited for high-pressure (fuel injected) systems!

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

FUELGAUGEKIT
Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Sytec In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

  • Sytec fuel pressure gauge (0 - 15 PSI / 0 - 1 Bar)
  • Pressure gauge adapter with connections for 8 mm fuel line
  • Brass blanking plug
  • Roll of our Superior Quality PTFE tape
  • 2 Stainless Steel jubilee clips for 8 mm fuel line

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.
A high-pressure set for fuel injection systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

WFR150
Webcon Low-Pressure Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Webcon Low-Pressure Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar.

Ideal for setting the pressure on fuel injection systems.

Glycerin-filled for accurate reading under all circumstances.

Can be used with our Fuel Pressure Gauge Adapter.

Thread: 1/8th" tapered NPTF.

Range:

  • 0 - 120 PSI
  • 0 - 8 Bar

Note:
This gauge should only be used for setting-up and then be removed for normal running.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

Webcon Low-Pressure Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

WFR151
Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar.

Ideal for setting the pressure on fuel injection systems.

Glycerin-filled for accurate reading under all circumstances.

Can be used with our Fuel Pressure Gauge Adapter.

Thread: 1/8th" tapered NPTF.

Range:

  • 0 - 120 PSI
  • 0 - 8 Bar

Note:
This gauge should only be used for setting-up and then be removed for normal running.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

Webcon High-Pressure Fuel Pressure Gauge 0 - 120 PSI / 0 - 8 Bar

WFP150KIT
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Webcon In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.

A high-pressure set for fuel injection systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

WFP151KIT
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

Webcon In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on high-pressure injection systems.

A low-pressure set for carbureted systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.

Webcon In-Line Fuel Pressure Gauge Kit - 0 - 120 PSI / 0 - 8 Bar

67263TS
Roll of Superior Quality PTFE Thread Sealing Tape

Roll of Superior Quality PTFE Thread Sealing Tape

Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.

12 millimeter wide

Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!

As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.

 

 

Roll of Superior Quality PTFE Thread Sealing Tape

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant